Logitech Alert 4+

Logitech Inc.

    • 3.3 • 241 Ratings
    • Free

Screenshots

Description

Get the power and freedom to connect to your Logitech Alert™ Video Security System with an app designed specifically for your iPhone, iPad or iPod.

NOTE: This app only supports Logitech Alert cameras, not WiLife cameras.

CHECK STATUS
See an fresh image from your cameras see as soon as you login.

WATCH LIVE VIDEO - HEAR AUDIO
Check in on your cameras anytime and watch H.264 video, optionally with audio, streaming live from your cameras.

ACCESS YOUR ON-CAMERA DVR
Watch the high-quality video recordings, including audio, created when your camera detected motion while you were away. Interact with your recordings using pause or quickly move to early or later clips (Mobile Commander feature).

CHANGE ALERTS
Turn motion alerts on or off with the flick of your finger (Mobile Commander feature).

VIEW IN LANDCAPE OR PORTRAIT
Rotate your device to landscape or portrait as you navigate through your cameras and watch video.

SECURE ACCESS
Your cameras are always secure and only accessible with the username and password you create.

OPTIMIZED FOR WI-FI
Stream directly from your cameras when your device and cameras are on the same Wi-Fi network. Please use Wi-Fi for the best video and audio performance and experience.

SUPPORTS:
iOS 8.4 and higher supported devices.

PRIVACY STATEMENT:
http://alert.logitech.com/privacy

What’s New

Version 5.3

This app has been updated by Apple to display the Apple Watch app icon.

- Resolve issue on iOS 10 where live view only shows a spinner.
- Resolve issue on iOS 10.1 where you get a warning - "Alert" May Slow Down your iPhone.
- Resolve issue where login can unexpectedly take half a minute or more.
- Add 64-bit support for the latest iOS device models.
- Update to use the latest iOS SDK (10) and Xcode (8.1).
- Fix username and password controls moving offscreen when the device is in landscape.
- Fix a few layout issues for newer iOS devices.
- Other improvements.
- The minimum iOS version is now 8.4. For older versions of iOS, use the previous 5.2 release.

Ratings and Reviews

3.3 out of 5
241 Ratings

241 Ratings

PKJxyz ,

Review

We use it frequently. I would be rated higher if Logitech had stayed and conducted business more straightforwardly. The support crew does a good job but many times English communication suffers. I would purchase more if hardware were available.
* This review is to say thanks for the IOS 10.1 upgrades. Mine worked well the first try! Let's hope it continues and proves to be a successful change.

MohaveJim ,

Thanks for the update on IPhone and IPad.

I was getting tired of seeing that "wheel" go around and nothing else. I have 4 Alert cameras and have been using them ever since I switched from Wilife years ago. On a few occasions due to power failures or other issues, I have considered going to a wired system. I'm 77 years old and not as good at climbing ladders as I used to be. My cameras are mounted anywhere from 10 to 30 feet up in order to get the viewing angles I need. Plugging and unplugging from the power source and "papercliping the camera can be a chore I don't look forward to.
As you can see by my 5 stars, I love my Alert system. Being able to have my active cameras pop up on my computer screen while I am doing something else, and having them record directly to my computers hard drive puts your product head and shoulders above ANY system currently available. I wish Logitech was still producing wireless security systems. Thanks for keeping up with the software and email tech support.

Jim Melick
Fort Mohave, AZ

Pipe8888 ,

Works Perfectly with latest iOS & 3.5 FW

Cameras require 3.5 Firmware (FW) to work properly on iPhone/iPad with iOS 10.3.2 through 13.7 software. To check camera Firmware(FW) open Alert Commander on your MAC. Go to Settings>General>Firmware. Below each camera you will see it's current firmware. If you have 3.2, 3.3 or 3.4 Firmware pull down menu on right side and see if you can update to 3.5 Firmware. If not available, contact LOGITECH and insist they provide you with a way to update to current 3.5 Firmware.

BTW, camera reliability is improved by occasional reFormat of SD Card. On your iPhone or iPad go to Settings>Select Camera>Format micro SD Card.

App Privacy

The developer, Logitech Inc., has not provided details about its privacy practices and handling of data to Apple. For more information, see the developer’s privacy policy.

No Details Provided

The developer will be required to provide privacy details when they submit their next app update.

More By This Developer

UE | BOOM
Music
Harmony® Control
Entertainment
UE ROLL
Music
Jaybird
Music
BLAST & MEGABLAST
Music
Logitech Mevo
Photo & Video

You Might Also Like

HomeCam for HomeKit
Lifestyle
The Home Remote
Lifestyle
Home+ 6
Lifestyle
Signals for HomeKit
Lifestyle
HomePass for HomeKit & Matter
Lifestyle
Home + Security
Lifestyle